RSS Feed
Tampilkan postingan dengan label crude palm oil. Tampilkan semua postingan
Tampilkan postingan dengan label crude palm oil. Tampilkan semua postingan

Pabrik Kelapa Sait Mini | Pembuatan PKS Mini

Posted by Flora Sawita Labels: , , , , , ,

1.       PENDAHULUAN
Kelapa sawit merupakan komoditasperkebunan yang telah di usahakan di Indonesia secara komersial sejak 1911, komoditas kelapa sawit mempunyai peran yang cukup besar terhadap perekonomoian nasional maupun daerah terutama dalam hal perolehan devisa  penyediaan lapangan kerja dan peninkatan pendapatan . Pada awal perkembangannya, perkebunan sawit hanya di usahakan  oleh perkebunan besar swasta dan milik Negara , tetapi sejak awal 80an mulai di kembangkan  perkebunan kelapa sawit rakyat (PIR). Saat ini komposisi ke pemilikan perkebunan kelapa sawit di Indonesia adalah 17% perkebunan besar milik Negara, 50% perkebunan besar swasta dan 33% perkebunan rakyat swadaya.
                Pengusahaan perkebunan kelapa sawit sebetulnya cukup menguntungkan dibandingkan dengan komoditas lainya. Namun, keadaan perkelapa sawitan Indonesia sering tidak menentu terutama karena harga crude palm oil (CPO) di pasar internasional yang berfluktuasi tajam. Selain itu pada saat produksi puncak, banyak tandan buah segar (TBS) yang tidak dapat di olah karena kapasitas pabrik yang terbatas. Sitasi ini dapat menyebabkan petani kelapa sawit, terutama petani rakyat suwadana dan perkebunan besar sekala kecil dan menengah mengalami kerugian sehingga dapat mengganggu pengembangan perkebunan kelapa sawit secara keseluruhan. Oleh karena itu perlu di cari upaya untuk menaikan nilai tambah kelapa sawit melalui suatu proses yang sederhana, murah serta berwawasan lingkungan sehingga pendapatan petani dapat meningkat.

2.  MASALAH  PEMASARAN TBS
                Dalam agro industri kelapa sawit, buah harus di panen apabila sudah masak dengan toleransi +/-5 hari dari masak optimum dan harus di olah selambat-lambatnya 24 jam setelah panen. Apabila sarat ini tidak di terpenuhi maka kualitas dan kuantitas minyak yang dihasilkan akan turun sehingga  perkebunan sangat tergantung  pada PKS.
                Masalah utama yang dihadapi produsen TBS adalah volume yang dapat di terima oleh PKS tidak konstan sebagai akibat dari fluktuasi produksi TBS dari kebun milik PKS sendiri atau pihak yang mempunyai ikatan kerja dengan PKS. Secara teknis ukuran PKS di tetapkan berdasarkan produksi bulanan maksimum  dari konsensi  areal baik berupa kebun sendiri maupun kebun lain yang mempunyai ikatan pengolahan dengan PKS. Ukuran PKS yang umum di gunakan adalah kapasitas  20, 30, 60, 90 dan 120 ton TBS/jam. Berdasarkan distribusi produksi bulanan, pada September, Oktober  dan Desember , PKS di Sumatra utara misalnya praktis tidak dapat menerima buah di luar konsensi karena produksi buah dari kebun sendiri  yang melimpah. Sebaliknya pada bulan Januari – April, PKS sangat membutuhkan buah dari luar konsensi karena buah dari dalamkonsensi hanya mampu memasok kurang dari 70% kapasitas. Pada Mei-Juli, PKS juga memerlukan buah dari luar konsensi meskipun tidak mendesak seperti pada Januari-April.
                Perkebunan Rakyat eks-proyek PIR, mempunyai ikatan dengan PKS sebagai inti sedangkan perkebunan rakyat swadana, UPBSK (Usaha Perkebunan Besar Sekala Kecil) dan UPBSM (Usaha Perkebunan Besar Sekala Menengah) umumnya tidak, sehingga tidak ada kewajiban PKS untuk menampung produksi mereka. Oleh sebab itu posisi tawar menawar (bargaining position) dari petani swadana, UPBSK dan UPBSM menjadi sangat lemah pada bulan Agustus-Desember. Dalam bulan bulan tersebut, mereka akan sulit dan bahkan  mungkin tidak dapat menjual TBS nya. Dalam keadaan demikian harga TBS di pasar akan lebih rendah dari semestinya.

3.  PABRIK KELAPA SAWIT MINI
                Berbagai permasalahan diatas telah mendorong  digunakanya teknologi tepat guna yang terpadu yang khusus dirancang untuk petani kelapa sawit atau kelompok tani dengan total luas area kebun 200-300ha. Teknologi terpadu yang di kembangkan  mempunyai cirri:

    Sederhana
    Murah
    Bernilai tambah
    Berwawasan lingkungan

Dengan memperhtikan keadaan tersebut, perlu di upayakan peningkatan pendapatan petani kelapa sawit, UPBSK dan UPBSM. Salah satu alternatifnya adalah dengan melakukan pengolahan TBS sendiri. Dengan Cara demikian petani kecil swadana, UPBSK dan UPBSM tidak terlalu bergantung pada PKS besar Sehingga nilai tambahnya dapat di nikmati.
PKS mini hanya memerlukn tenaga kerja 6 orng/shift termasuk pengawas dan tenaga teknik, memanfaatkan cangkang, seratmesokarp dan tandan kosong sebagai bahan baker, sangat mudah di oprasikan dan hanya memerlukan lahan seluas +/-2.500 m2 dengan bangunan sederhana seluas 250 m2 . Rancangan PKS mini cukup sederhana sehingga pemeliharaanya mudah dan dapat di lakukan oleh teknisi dengan kualifikasi STM.
a.       Deskripsi PKS mini
PKS mini terdiri dari 19 unit peralatan pengolahan yaitu:

    Satu unit boiler kapasitas 600 kg uap/jam.
    satu unit sterilizer kapasitas 1 ton tandan buah segar (TBS) per jam.
    Satu unit mesin penebah /threser.
    Satu unit Fruit elevator.
    Satu unit digester.
    satu unit screw press mini kapasitas 1 ton TBS/jam.
    Satu unit sand trap.
    Satu unit Vibrating Screen.
    Satu unit crude oil tank c/w pump.
    Satu unit tangki klarifikasi.
    Satu unit tangki penampung minyak kapasitas 25 ton CPO.
    Satu unit cake breaker confeyor.
    Satu unit fiber separator.
    Satu unit nut confeyor  c/w nut bin.
    Satu unit ripple mill kapasitas 500 kg biji/jam
    Satu unit genset 80 KVA
    Satu paket instalasi listrik.
    Satu paket piping dan valves.
    Satu paket pemasangan, uji coba dan training.

b.      Mutu CPO
Minyak sawit yang di hasilkan mempunyai mutu sesuai standar perdagangan Indonesia, yaitu asam lemak bebas (ALB) < 2,5 %, kadar air dan kotorn < 0,4 %, serta rendemen 20 %.

4. HAL-HAL YANG PERLU DI PERHATIKAN
a. Kualitas bahan baku.
                Pada kajian financial di asumsikan bahwa rendemen minyak yang akan di peroleh adalah 20%. Rendemen sebesar 20% atau lebih hanya dapat di capai apabila kualitas buah sawit yang di olah adalah cukup baik  dan berasal dari industri kelapa sawit Indonesia  mempunyai peluang yang sangat baik dan berasal dari buah tenera (DxP). Pada beberapa perkebunan sawit rakyat, kadang-kadang terjadi kontaminasi dengan buah jenis Dura atau Pisifera kibat dari penanaman dengan benih yang di ragukan keaslianya. Konsekuensinya, rendemen minyak tidak akan dapat mencapai 20% sehingga secara financial tidak akan layak. Berbeda dengan PKS konvensional, pengaruh buah non Tenera pada PKS mini sangat besar terhadap rendemen karena buah yang diolah hanya 20 ton/hari.
b. Lokasi PKS mini
                PKS mini dirancang untuk daerah “remote”, yaitu daerh yang jauh dari PKS konvensional sehingga ongkos angkut TBS ke PKS konvensional bias di pangkas. Untuk kebun rakyat yang lokasinya dekat PKS konvensional serta tidak ada masalah dengan pemasaran  TBS, pendirian PKS mini tidak di sarankan. Demikian juga untuk Kebun PIR yang masih mempunyai ikatan kontrak dengan kebun inti.
c. Aspek perijinan
                Ijin Untuk pendirian kebun dan PKS telah di atur dalam SK Menteri  pertanian No 357  tahun 2002. Pada SK tersebut disebutkan bahwa semua usaha perkebunan  harus menjalin mitra dengan rakyat dalam berbagai bentuk kemitraan  yang saling menguntungkan. Untuk PKS mini, SK tersebut juga berlaku sehingga diharapkan tidak akan terjadi hal-hal yang tidak diinginkan dengan keberadaan PKS mini.
d. Pemeliharaan PKS
                PKS mini dirancang dengan konsep kesederhanaan dalam pemeliharaanya sehingga diharapkan pemeliharaan PKS dapat dilakukan oleh tenaga dengan kualifikasi setingkat dengan STM. Keberadaan PKS mini juga diharapkan dapat merangsang perkembangan bengkel lokal untuk pemeliharaan PKS.
e. Aspek pemasaran CPO
                Pemasaran CPO serta produk-produk olahanya adalah kunci dari kesuksesan PKS mini. Pengelolaan PKS mini harus menjalin kerjasama dengan pembeli atau pemakai langsung sehingga pemasaran CPO hasil produksi PKS mini terjamin. Hal ini sangat penting karena PKS mini hanya memiliki tangki CPO yang dapat menampung produksi untuk 5 hari, sehingga jadwal pengiriman CPO harus terencana dengan matang.

5. KESIMPULAN
                Industri kelapa sawit Indonesia mempunyai peluang yang sangat baik untuk berkembang. Tehnologi industri kelapa sawit mini  yang ramah lingkungan, sederhana dan mudah di oprasikan, merupakan jawaban dalam upaya meningkatkan kesejahtraan petani.

Mesin Minyak Goreng | Pembuatan Pabrik Minyak Goreng

Posted by Flora Sawita Labels: , , , , , , ,

DESKRIPSI PROSES PABRIK MINYAK GORENG

Pabrik Pengolahan Minyak Goreng (PPMG) ini adalah pabrik yang memproduksi minyak goreng dari bahan baku CPO (Crude Palm Oil / minyak sawit mentah). CPO yang diperoleh dari hasil proses pressing dan ekstraksi di Pabrik Kelapa Sawit (PKS) masih mengandung komponen-komponen yang tidak diinginkan yaitu asam lemak bebas (FFA = Free Fatty Acid), resin, gum, protein, fosfatida, pigmen warna dan bau. Agar dapat dipergunakan sebagai bahan makanan, maka CPO tersebut harus diproses lagi di Pabrik Pengolahan Minyak Goreng.
Secara garis besar proses pada Pabrik Pengolahan Minyak Goreng terdiri dari proses refining (pemurnian) dan fractionation (fraksionasi). Proses pemurnian terdiri dari proses degumming, proses netralisasi, proses bleaching dan proses deodorisasi. Minyak yang diperoleh dari proses refining terdiri dari  olein (minyak goreng) dan stearin, dalam proses fraksionasi stearin dipisahkan dari olein. Untuk memperjelas alur proses pengolahan minyak goreng dapat dilihat pada diagram blok Pengolahan CPO menjadi Minyak Goreng sebagai berikut :

1        Proses Degumming
Proses degumming bertujuan untuk menghilangkan zat-zat yang terlarut atau zat-zat yang bersifat koloidal, seperti resin, gum, protein dan fosfatida dalam minyak mentah. Pada prinsipnya proses degumming ini adalah proses pembentukan dan pengikatan flok-flok dari zat-zat terlarut dan zat-zat yang bersifat koloidal dalam minyak mentah, sehingga flok-flok yang terbentuk cukup besar untuk bisa dipisahkan dari minyak.  Proses degumming yang paling banyak digunakan dewasa ini adalah proses degumming dengan menggunakan asam. Pengaruh yang ditimbulkan oleh asam tersebut adalah menggumpalkan dan mengendapkan zat-zat seperti protein, fosfatida, gum dan resin yang terdapat dalam minyak mentah.

2        Proses Netralisasi
Proses netralisasi atau deasidifikasi pada pemurnian minyak mentah bertujuan untuk menghilangkan asam lemak bebas yang terdapat dalam minyak mentah. Asam lemak bebas (FFA) dapat menimbulkan bau yang tengik.
Proses netralisasi yang paling sering digunakan dalam industri kimia adalah proses netralisasi dengan soda kostik, dengan prinsip reaksi penyabunan antara asam lemak bebas dengan larutan soda kostik, yang reaksi penyabunannya sebagai berikut :

R----COOH   +   NaOH                        R-COONa    +   H2O
Kondisi reaksi yang optimum pada tekanan atmosfir adalah pada suhu 70  oC, dimana reaksinya merupakan reaksi kesetimbangan  yang akan bergeser ke sebelah kanan.
Soda kostik yang direaksikan biasanya berlebihan, sekitar 5  % dari kebutuhan stokiometris. Sabun yang terbentuk dipisahkan dengan cara pengendapan.  Soda kostik disamping berfungsi sebagai penetralisir asam lemak bebas, juga memiliki sifat penghilang warna (decoulorization).

3        Proses Bleaching
Proses bleaching (pemucatan) dimaksudkan untuk mengurangi atau menghilangkan zat-zat warna (pigmen) dalam minyak mentah, baik yang terlarut ataupun yang terdispersi.
Warna minyak mentah dapat berasal dari warna bawaan minyak ataupun warna yang timbul pada proses pengolahan CPO menjadi minyak goreng. Pigmen yang biasa terdapat di dalam suatu minyak mentah ialah carotenoid yang berwarna merah atau kuning, chlorophillida dan phaephytin yang  berwarna hijau.
Proses bleaching yang   digunakan adalah proses bleaching dengan absorbsi. Proses ini menggunakan zat penyerap (absorben) yang memiliki aktivitas permukaan yang tinggi untuk menyerap zat warna yang terdapat dalam minyak mentah. Disamping menyerap zat warna, absorben juga dapat menyerap zat yang memiliki sifat koloidal lainnya seperti gum dan resin.
Absorben yang paling banyak digunakan dalam proses bleaching minyak dan lemak adalah tanah pemucat (bleaching erath) dan arang (carbon). Arang sangat efektif dalam penghilangan pigmen warna merah, hijau dan biru, tetapi karena harganya terlalu mahal maka dalam pemakaiannya biasanya dicampur dengan tanah pemucat dengan jumlah yang disesuaikan terhadap jenis minyak mentah yang akan dipucatkan.

4        Proses Deodorisasi
Proses deodorisasi bertujuan untuk mengurangi atau menghilangkan rasa dan bau yang tidak dikehendaki dalam minyak untuk makanan. Senyawa-senyawa yang menimbulkan rasa dan bau yang tidak enak tersebut biasanya berupa senyawa karbohidrat tak jenuh, asam lemak bebas dengan berat molekul rendah, senyawa-senyawa aldehid dan keton serta senyawa-senyawa yang mempunyai volatilitas tinggi lainnya. Kadar senyawa-senyawa tersebut di atas, walaupun cukup kecil telah cukup untuk memberikan rasa dan bau yang tidak enak, kadarnya antara 0,001 – 0,1 %.
Proses deodorisasi yang banyak dilakukan adalah cara distilasi uap yang didasarkan pada perbedaan harga volatilitas gliserida dengan senyawa-senyawa yang menimbulkan rasa dan bau tersebut, dimana senyawa-senyawa tersebut lebih mudah menguap dari pada gliserida. Uap yang digunakan adalah  superheated steam (uap kering), yang mudah dipisahkan secara kondensasi.
Proses deodorisasi sangat dipengaruhi oleh faktor tekanan, temperatur dan waktu, yang kesemuanya harus disesuaikan dengan jenis minyak mentah yang diolah dan sistim proses yang digunakan. Temperatur operasi dijaga agar tidak sampai menyebabkan turut terdistilasinya gliserida. Tekanan diusahakan serendah mungkin agar minyak terlindung dari oksidasi oleh udara dan mengurangi jumlah pemakaian uap. Pada sistem batch ini, tekanan operasi sekitar 3 torr dan temperatur 240 oC.

5        Proses  Fraksionasi
Proses fraksionasi terdiri atas kristalisasi suatu fraksi yang menjadi padat pada temperatur tertentu dan disusul dengan pemisahan kedua fraksi itu. Fraksi yang menjadi kristal adalah stearin dan yang tetap cair adalah olein.
Beberapa proses fraksionasi yang sering digunakan yaitu :
·         Fraksionasi kering (fraksionasi tanpa pelarut).
·         Fraksionasi basah (fraksionasi dengan pelarut).
·         Fraksionasi dengan menggunakan larutan deterjen sodium lauryl sulphat.
Proses fraksionasi kering didasarkan pada pendinginan minyak dengan kondisi yang terkendali tanpa penambahan bahan kimia apapun. Ada tiga operasi yang terlibat yaitu seeding, kristalisasi, dan filtrasi. Mula-mula minyak dipanasi sampai 70 oC untuk memperoleh cairan homogen dan kemudian didinginkan  dengan air pendingin sampai temperatur  40 oC, selanjutnya didinginkan samapi temperatur 20 oC dan dipertahankan  sampai proses kristalisasi dianggap selesai. 

Fresh Fruit Reception

Posted by Flora Sawita Labels: , , ,

The first process is the reception of FFB (Fresh Fruit Bunch) in a Palm oil mill.
The FFB arrives in a mil in trucks or trailers. These are first weighed over a weighbridge. The trucks then go to the FFB loading ramp, where they are emptied. Most trucks have tipping containers and the trucks can be unloaded fast. In many remote areas the trucks are manually unloaded, and this takes time.
The FFB arriving at the mill has to be checked for quality. Ripe FFB yields very much more oil than under ripe FFB. The major factors that will determine the quantity of oil (Oil extraction Ratio- OER) is the ripeness of the FFB.
The FFB is graded by FFB graders and the suppliers penalised for poor quality of FFB delivered. The penalty can be by allocation of a lower oil extraction ratio or a deduction in the weight of the FFB supplied. The price of FFB is determined by the oil available in the FFB.
FFB Grading
The purpose of FFB grading is to determine the quality of FFB received. This helps to determine the purchase price. If the FFB is from company plantation the grading provides feed back to the plantation on the FFB quality.
A ripe fruit bunch is a bunch that has fruit that are reddish orange in colour and has some fruit that have been detached. When the fruits are ripe they fall off the bunch. Ripe fruit contain the maximum amount of oil.
Definition of Bunches
1. Ripe Bunch – 10 loose fruits
2. Over ripe bunch – A bunch with more than 10 loose fruits
3. Very over ripe –A bunch with more than between 10 to 50 fruits detached.
4. Empty bunch- A bunch more than 90 % fruits detached
5. Spoilt bunch- A bunch 30% fruits damaged by rats.
6. Un-fresh bunch- A bunch that was harvested more than 48 hours, can be determined by stalk condition
7. Under ripe bunch –A bunch with  less than 10 loose fruit
8. Hard bunch – A bunch with no loose fruit
9. Diseased bunch – a deformed bunch
10. Dirty bunch – a bunch that has earth and other dirt
A rating system determines the penalty for each factor.

Pricing of FFB
The pricing of FFB depends on the given oil extraction ratio (OER), current price of crude palm oil(CPO), price of palm kernels(PK), the processing cost(PC), the transport cost of CPO(TCPO), the transport cost of kernels(TPK) and any other cost  Othr (i.e incentives, discounts etc)
All the above factors can be incorporated into a formula that can be solved with a computer or manually.
Price of FFB per Tonne
 = OER x Pcpo+KER xPpk - Pcost-OERx(Tcpo)-KERx(Tpk)-Other cost.
For example the price of FFB for the following
CPO price is $ 2000 per Ton CPO------------------------Pcpo
Palm Kernel Price is $ 1000 per Ton palm kernels-----Ppk
Processing Cost = $ 35 per ton FFB---------------------- Pcost
CPO transport cost = $ 50 per ton CPO------------------Tcpo
Kernel transport cost $ 50 per ton Palm Kernels--------Tpk
Other costs = $ 50 per ton FFB---------------------------  Other Cost
Assume OER = 20 %
Assume KER = 5 %
Then the price of FFB per tonne will be
= 0.2 x 2000 + 0.05 x 1000 – 35 – 0.2 x 50 – 0.05x 50 – 50
= $ 352.5

The profitably of processing FFB will depend on the Actual oil and kernel extraction ratios obtained in the mill and the ratios used to calculate the price of FFB purchased.
If the FFB is bought at 20.00 % extraction ratio and if the mill obtains 21.8 % extraction ratio then the difference of 1.8% oil will be profit. If the extraction ratio obtained by the mill is lower than that paid for the purchase, then the mill may loose money.
The profit margin will be very low if a mill that buys FFB and solely depends on processing cost margin to make a profit.
Operating Procedure loading Ramp.
For the operation of the loading ramp the operators must follow the policy of First in First out. This way the retention time of FFB in the loading ramp will be minimised.
The Free Fatty Acid (FFA) increases with time, even one day will cause the FFA to rise significantly. If the FFA in the crude palm oil is more than 5% then generally a lower price is obtained when the oil is sold.

http://www.palmoilmill.co.nz/index.php?option=com_content&view=article&id=47:fresh-fruit-reception&catid=47:ffb-reception&Itemid=71

The Extraction of Palm oil

Posted by Flora Sawita Labels: , , , ,

Introduction


This introductory article gives a brief description of the process of extracting palm oil in a modern factory. Detail descriptions are contained in other articles found at this site. A typical process flow diagram is included. Pictures are included in this article to make thing clearer to people unfamiliar to the oil Palm industry.

Palm oil factories are normally generate their own electricity. Electricity is generated by burning the waste products of the fruits, fibre and shell in a boiler. The boiler generates steam which drives a steam turbine to produce electricity. Palm oil mills are located in plantations that are far away from major towns and as such they also treat their own water supply.

The extraction process is a series of separating processes. These are described below.

    

A Ripe oil Palm Fruit Bunch                                                                   An Oil Palm Tree

Harvesting.

Palm oil is extracted from oil palm fruits. Oil palm trees grow in the tropics and originated in Africa. The fruit bunch is cut when it is ripe as shown in the picture.  The harvested fruit bunches are sent the processing plants by trucks for the extraction of Palm Oil.

Fruit Reception
The arriving fruit usually in trucks is dumped into a FFB (Fresh Fruit Bunch) hopper. It is then transferred to fruit cages. The cages are then moved into a steriliser.

Sterilisation

 The steriliser is similar in function of a pressure cooker. The fruits are heated with steam at a pressure of 45 psig for about one hour. This cooking process softens the fruits, enables the separation of the fruit from bunches and stops the enzymes that cause the increase of FFA (Free fatty acids) in the fruits.

Threshing

In the next stage the fruit cages are tipped and conveyed to a threshing machine. This machine a rotary drum of about 2 meters in diameter.  The drum rotates and bunches get lifted up and dropped when they reach the top of the drum. This action helps the detachment of fruits from the bunches and the separated fruit lets fall through the slots of the drum to a conveyor below.

Pressing

The fruits are conveyed to a digester which mashes up the fruitlets so that when the mash is pressed in a screw press the oil is extracted efficiently. The output from the screw press is crude palm oil and press cake. The extracted oil is mixed with fruit particles, water, sand and dirt.  The press cake consists of palm fibre and nuts.
The press cake is the transferred to the depericarpper for further processing.
The crude oil is first screened with a vibrating screen to remove the course fibres and other dirt and it is then pumped to the clarification station for further processing.

Clarification Station

The oil is pumped to a heated vertical tank where the separation of oil from the sludge (mixture of water and dirt) takes place by gravity. The oil is skimmed from the top and the remaining dirt removed in a purifier. The heated clean oil is the passed to a vacuum chamber for the removal of the remaining moisture. The oil is the pumped to storage tanks for sale as crude palm oil.

Press Cake processing.
The press cake is conveyed in a conveyor that assists the break up the cake to a depericarper. The depericarper is a square box that with a strong suction. The air removes the fibres and transports them to a cyclone. The fibre from the cyclone is sent to the boiler for burning as fuel for the generation of steam.
The nuts being heavier drop to the bottom of the depericarper and are cleaned in a rotary drum and transported to a silo for intermediate storage.

Nut Processing
The nuts from the nut silo are first cracked in a nut cracker. The cracked mixture which consists of kernels and shell is the processed to separate the shells and kernels. This is done in air columns and by a water bath in a hydro-cyclone. The shell is sent to the boiler house to be used as fuel. The kernels are dried in a silo and then packed in bags for sale. Other factories extract oil from the kernel.

Power Generation.
In a palm oil mill all the electricity required for processing can be generated from the waste products of the palm fruits. The diesel generators are only required for start up and shut done of processing in a well operated palm oil mill.
The fibre from the fruits after pressing and shell from cracked nuts are sent to the boiler for burning as fuel. The steam generated by the boiler is used to drive a steam turbine which is coupled to an alternator to generate electricity.


Water Treatment
In the palm oil mill process water is required for the steam generation, oil clarification, cleaning and domestic requirements. The quantity of water required is determined by the processing capacity of the mill, for example a 30 tons per hour mill will require 30 cubic meters of water per hour. Most palm oil mills are located in plantations that are far away from towns. This requires most palm oil mills to treat their water requirements. The treatment plants purify the water for process use and then further treat it for use in the boilers.

Effluent Treatment

The palm oil process uses water to separate the oil from sludge and solids in a tank. After the removal of oil, the waste water (effluent) is discharged from the mill. This effluent contains particles of vegetable matter and needs to be treated before discharge to the environment. The effluent needs to be treated because the vegetable matter in the liquid will decompose and during the decomposition process, the vegetable matter will use oxygen in the water. Therefore before the discharge of the effluent to a water course we let the decomposing process take place by keeping the effluent in ponds and let bacteria decompose the vegetable matter in the waste water.



This then is a simple explanation of the palm oil process.

Sterilising Station

Posted by Flora Sawita Labels: , , ,

Purpose:
The purpose of sterilising FFB (Fresh Fruit Bunches) is to treatment them for further processing.
What is sterilising?
Sterilising is a process where the fruit bunches are cooked under steam pressure. Cooking is normally carried out under 3 bar pressure (45 pounds per square inch – psi) for approximately 90 minutes.
During the cooking process the fruits become soft and the enzymes that produce free fatty acid are deactivated. The fruits are also easier to be detached from the bunch after the sterilising process. During the heating under pressure and the subsequent realising of pressure there is a moisture loss from the fruit bunch of about 10%. The loss of moisture from the stalk joining the fruit to the bunch enables the fruit to be easily separated from the bunch. The separation of the fruit from bunches is carried out in the next stage of the palm oil extraction process, called threshing.


Picture of sterilisation station

The sterilising Process.

The fruit bunches are loaded into the fruit cages. The cages with the fruits are pushed into the sterilisers. The movement of cages can be by hydraulic cylinders mounted on the floor in between the rail tracks or by winches.
Once the cages are inside the steriliser the doors are closed. The cooking is by steam. This is let in by opening of the inlet valves. In most palm oil mill the opening and the closing of steam valves is automated and controlled by a simple programmer.
The fruits are normally cooked under steam pressure for 90 minutes. Once the cooking is complete and the steam exhausted from the steriliser. The doors are opened and the fruit cages pulled out of the steriliser.

The cages are the emptied either by being lifted by a crane and rotated on to a thresher or rotated at ground level by a tipper.

The steriliser is a pressure vessel and as such it should be designed to pressure vessel design codes. The shell thickness of the steriliser is normally 12mm. The bottom half of the inside of the steriliser is lined with liners of mild steel or stainless steel so that when the wear they can be replaced. The liners protect the body of the steriliser from wear and extend the life of the steriliser.  The doors and the dish end of the steriliser should be protected by full liners. The doors are expensive to replace. The body of the steriliser is insulated so that the heat loss is minimised.

The sterilising capacity for a palm oil mill depends on the design capacity of the mill. The sterilised fruit must be available at the right time in the right quantity so the mill can achieve the designed processing capacity.
As a sterilising cycle take approximately 2 hours -cooking time and door opening and closing.
Therefore for 30 tons per hour processing capacity the sterilising capacity should be 60 ton. If the mill is designed with cages of 10 tons the mill should have two sterilisers of 3 ten ton cages each. The fruit cage size normally varies from 2.5 tons to 20 tons depending on the design of the mill.

Palm Oil Milling Process

Posted by Flora Sawita Labels: , , , , , , , , ,

Edible Oil Processing - Production


PALM OIL MILLING PROCESS


Introduction
Palm oil is extracted from fresh fruit bunches (FFB) by mechanical process, where a mill commonly handles 60 to 100mt per hour of FFB. The modern palm oil mill of today is based predominantly on concepts developed in the early 50s (Mongana Report). An average size FFB weighs about 20-30kg and contains 1500-2000 fruits (Figure1). The FFBs are harvested according to harvesting cycles, and delivered to the mills on the same day. The quality of crude palm oil is dependent on the care taken after harvesting, particularly on the handling of the FFBs.
Figure 1
Figure 1. Fresh fruit bunches waiting for processing at palm oil mill
A palm oil mill produces crude palm oil and kernels, as primary products and biomass as secondary product. The capacity of mills varies between 60- 100 tons FFB/h. A typical mill has many operation units as shown in Figure 2. This comprises of sterilization, stripping, digestion and pressing, clarification, purification, drying and storage. For the kernel line, there are steps such as nut/fibre separation, nut conditioning and cracking, cracked mixture separation, and kernel drying, storage. The dried kernels are often sold to palm kernel crushers for extraction of crude palm kernel oil. In some integrated plants, kernel crushing facilities exist side by side at the same complex.
Figure 2
Figure 2. Flow chart for the palm oil process (from Sivasothy, 2000).

Sterilisation

This first step in the process is crucial to the final oil quality as well as the strippability of fruits. Sterilization inactivates the lipases in the fruits, and prevents build-up of free fatty acids (FFA). In addition, steam sterilization of the FFBs facilitates fruits being stripped from the bunches. It also softens the fruit mesocarp for digestion and release of oil, and conditioning of nuts to minimize kernel breakage. Air is removed from the sterilizer by sweeping in steam in single-peak, double-peak or triple-peak cycles. In general, bunches are cooked using steam at 40psig. in horizontal cylindrical autoclaves for 60-90 minutes. The length of the sterilizer is dependent on the number of cages required for operation of the mill. Each cage can hold 2.5 to 10tons of FFB. Steam consumption varies from 140 kg/ton FFB for a single-peak cycle to 224 kg/ton FFB for a triple – peak cycle (Sivasothy et al.1986). Inadequate sterilzation affects the subsequent milling processing stages adversely.
In recent years, new technology on sterilization saw the introduction of continuous sterilizers. Sivasothy’s (2006) continuous sterilizer showed improved fruit strippability, even with usage of low pressure steam or atmospheric steam. The new system consists of conveyor belt taking crushed FFBs into the continuous sterilizer, where the fruits are sterilized and subsequently discharged. This reduces much of the machinery associated with conventional sterilizers. In addition, there are cost savings in terms of manpower requirements, and maintenance.
Vertical sterilizers are also available, which are much cleaner and easier to operate than conventional sterilizers.
Another type of sterilizer technology, the Tilting sterilizer (Loh, 2010) also eliminates much of the machinery associated with conventional sterilizers. The technology is the latest design that offers improved milling efficiency, and reduced labour and maintenance cost.
Figure 3
Figure 3. A conventional sterilizer

Stripping

Stripping or threshing involves separating the sterilized fruits from the bunch stalks. Sterilized FFBs are fed into a drum stripper and the drum is rotated, causing the fruits to be detached from the bunch. The bunch stalks are removed as they do not contain any oil. It is important to ensure that oil loss in the bunch stalk is kept to a minimum. The stalks are often disposed by incineration, giving ash as potash fertilizer, and fuel for boilers. Others are transported to the plantations for use as fertilisers in mulching near the palms. The total oil loss absorbed on the stalks depends on the sterilizing conditions and partly on the way the stripper is operated. Prolonged sterilization will increase oil loss in stalks. Irregular feeding of the stripper may also result in increase of oil loss in stalks. Stalks which have fruits still attached on them are called hard bunches, and have to be recycled back to sterilizers for further cooking. Hard bunches are detected by visible inspection.

Digestion and Pressing

After stripping, the fruits are moved into a digester where, the fruits are reheated to loosen the pericarp. The steam heated vessels have rotating shafts to which are attached stirring arms. The fruits are rotated about, causing the loosening of the pericarps from the nuts. The digester is kept full and as the digested fruit is drawn out, freshly stripped fruits are brought in. The fruits are passed into a screw press, where the mixture of oil, water, press cake or fibre and nuts are discharged. Improvements in press designs have allowed fruits to undergo single or multiple pressing. Second stage pressing on the press cake fibres enables more oil to be extracted.

Clarification

A mixture of oil, water, solids from the bunch fibres is delivered from the press to a clarification tank. In the conventional process, separation of the oil from the rest of the liquor is achieved by setting tanks based on gravity. The mixture containing the crude oil is diluted with hot water to reduce its viscosity.A vibrating screen helps remove some of the solids. The oil mixture is heated to 85-90◦C and allowed to separate in the clarification tank. A settling time of 1-3 h. is acceptable. Oil from the top is skimmed off and purified in the centrifuge prior to drying in vacuum dryer. The final crude palm oil is then cooled and stored. The lower layer from the clarification tank is sent to the centrifugal separator where the remaining oil is recovered. The oil is dried in vacuum dryers, cooled and sent to storage tanks.

Decanters

Decanters are also used in some mills as an alternative to separating the suspended solids from crude palm oil in a clarification tank. Various design of decanters are available. Their usage is however, hampered by higher maintenance costs from the wear and tear. An advantage to the use is the reduction in palm oil mill effluent. Sulong and Tan (1996) had proposed a membrane filter press for oil and solids recovery. The cake is discharged as solid waste for fertilizer production or animal feed, while the oil is recovered.

Oil Losses during Processing

Oil losses in mills vary from mill to mill, and much attention is given to the control of oil loss. The main oil loss are from sterilizer condensate, empty bunches, fruit loss in unstrapped bunches, press cake fibre, nuts and sludge. Over-ripe bunches will lose more oil during sterilization. To minimize this, shorter sterilizer cycles are used, or better control of bunch ripeness and quality will help ensure less wastage. A typical oil loss in sterilizer is estimated to be 0.1% to FFB. Oils recovered from sterilizer condensate should be used as technical oils, as they often contain higher iron content and would reduce oil stability if mixed with the crude production oil.

Kernel Production

The press cake from the digester is fed to a vertical column (depericarper) where air is channeled to lift the fibre, thus separating the fibre from the nuts. The nuts are passed to a polishing drum at the bottom of the depericarper, where pieces of stalks are removed. A nutcracker cracks the nuts after the conditioning and drying process. A ripple mill is also used instead of nut cracker. The mixture of cracked nuts and shells are separated via a winnowing system, followed by a hydrocyclone or a clay bath. A hydrocyclone uses centrifugal force to separate the kernel from the shell using water. The clay bath principle works on the specific gravity of kernel of 1.07 and the shell of 1.17. The kernels will float while the shells sink in a clay bath mixture of SG 1.12. The kernels are then dried in hot air silos to moisture content of less than 7%. About 0.4mt of kernels are produced with every mt of CPO.

Biomass

The amount of solid palm oil waste available from a mill can be substantial. This consists of empty fruit bunches (EFB), palm kernel shell, mesocarp fibres, and possibly solids from decanters. In most cases, this biomass especially, the EFB, palm kernel shell and mesocarp fibres are used as fuel in the mill, generating enough electricity for running the mill. Besides usage as fuel, the biomass together with fronds and trunks can be left in the fields as fertilizers. EFBs can also be combined with polyurethane ester (PU) to prepare medium density fibreboard, giving higher impact strength and better water resistance (Khairiah, 2006).
Table 1. Dry basis calorific value of palm waste materials (Source: Yap, 2010).
Type of biomass Average calorific value(kcal/kg)Range (kcal/kg)

  Empty fruit bunches1879518000-19920
  Fibre1905518800-19580
  Palm kernel shell1888418880-18895
  Nut2448124256-24830



Treatment of Raw Palm Oil Mill Effluent (POME)

A palm oil mill produces an average of 0.65 tonne of raw palm oil mill effluent (POME) from every ton of FFB processed. POME is the main cause of environmental pollution due to its high acidity, high biological demand (BOD) and chemical oxygen demand (COD). Conventionally, anaerobic digestions in ponding systems or aerobic treatments are able to bring the BOD levels to below 100 mg L-1. Open steel tank digesters are used for tapping the biogas for power consumption. In Malaysia, certain areas have more stringent requirements (BOD of less than 20mg L-1. Tertiary systems have been developed as new systems to provide effluent treatment in a more sustainable manner, as well as achieving the standards required by regulatory bodies. These include biological sequencing batch reactors, bio-filtration systems, systems with high aeration rates, activated sludge plants with aerobic reactors, bio-flow polishing plants, as well as membrane bioreactors. More palm oil plantations are investing into these technologies to harvest the biogas for fuel, and re-use other biomass materials for fertilizers, bio-composite materials, etc.

References

  • Khairiah, B and Khairul, A.M.A. Bio composites from oil palm resources. Journal of Oil Palm Research, April, 103-113 (2006).
  • Loh, T.K. Tilting sterilizer. In: Palm Oil Engineering Bulletin, No 94, pp. 29-42 (2010). MONGANA Report, Volume 1 and 2 Coopérative des Producteurs et exportateurs de l’huile de palme du Congo Belge. (1955).
  • Sivasothy, K., Shafil, A.F. and Lim, N.B.H. Analysis of the steam consumption during sterilization., Workshop on recent developments in palm oil milling technology and pollution control, Kuala Lumpur, p. 19, Malaysian Palm Oil Board, Kuala Lumpur )(1986).
  • Sivasothy, K. Advances in Oil Palm Research, Vol 1, 747, Y. Basiron, B.S. Jalani, and K.W. Chan (eds) , Malaysian Palm Oil Board, Kuala Lumpur) (2000).
  • Sivasothy, K. Continuous sterilization: the new paradigm for modernizing palm oil milling. Journal of Oil Palm Research, April, 144-152 (2006).
  • Sulong, M. and Tan, R.C.W. Filtration system for crude palm oil clarification and purification. In: Proc. Of the 1996 PORIM International Palm Oil Congress, Kuala Lumpur, pp. 410-424. (B. Muhamd, A.N. Ma, M.S. Affandi, Y.M. Choo, A. Kuntom, C.L. Chong, A.G.M. Top, K. Yaakob, S. Ahmad, J. Thambirajah, Z.A.A. Hassan and R. Masri (eds), Malaysian Palm Oil Board, Kuala Lumpur)(1996).
  • Yap, A.K.C. Palm waste as alternative fuel for cement plant. Palm Oil Engineering Bulletin No 91, 13-21 (2010).

Malaysia, Indonesia Refute EPA Report On Palm Oil-based Biofuels

Posted by Flora Sawita Labels: , , , , , , ,

Salmy Hashim Bernama 23 Mar 12;

WASHINGTON, March 23 (Bernama) -- Malaysia and Indonesia, the world's largest producers of palm oil, are on a joint mission to correct and update a United States Environmental Protection Agency (EPA) report that could impact future exports of palm oil-based biofuels.

Plantation Industries and Commodities Minister Tan Sri Bernard Dompok, who is leading the effort, described the current EPA report as "erroneous" and felt the need to "come personally to the US" for discussions with senior US officials, saying the EPA data did not reflect the current standards practised in the producing countries.

The EPA published in December last year its findings that two types of palm- based biofuels - biodiesel and renewable diesel - have failed to meet the minimum 20 per cent greenhouse gas emissions savings threshold requirement needed to qualify as renewable fuels under the Renewable Fuel Standard 2 (RFS 2).

"What happens here is heard by the rest of the world - and will reverberate around the world - painting a bad picture of palm oil," Dompok told Bernama and RTM here on Friday.

The EPA has invited all parties, including Malaysia and Indonesia, to submit comments on the report, and has extended its deadline to April 27.

Dompok, who met senior officials at the EPA, was hopeful that the problem would be resolved backed by the latest data on sustainable production of palm oil in the two countries.

Indonesia was represented by the Director General of Processing and Marketing under the Ministry of Agriculture, Zaenal Bachruddin.

Dompok also met senior officials at the Department of Agriculture and Deputy US Trade Representative Demetrios Marantis to discuss the joint issue, including efforts to protect the environment as the two countries develop its palm oil industries and provide a source of income for smallholders as well as alleviate poverty in rural areas.

US-Malaysia bilateral trade in 2011 was at US$36.9 billion (RM113.496 billion), while US-Indonesia trade was US$27 billion (RM83.045 billion).

Malaysia is the world's largest exporter of palm oil, and its number one consumer is China, followed by the European Union, Pakistan, India, and the United States.

Last year, Malaysia exported 18 million tonnes of palm oil and products globally worth RM80.3 billion, with about 1 million tonnes going to the US at RM5.93 billion, an increase from RM4.2 billion the previous year.

"I see an increasing trend - the US is an important market for us," said Dompok.

On biofuel from palm oil, Dompok projects that the B5 (5 per cent bio diesel and 95 per cent petroleum diesel) which will use 500,000 tonnes of Malaysian palm oil, will be available for Malaysians by the end of the year.

Going forward, he foresees the development of B10, which would double the consumption of Malaysian palm oil and help the local biodiesel industry.

-- BERNAMA

Palm oil may be less heart-friendly than thought

Posted by Flora Sawita Labels: , , ,

Palm olein, a liquid form of palm oil used in cooking and baking, has been considered neutral in its effects on cholesterol but a new Danish study suggests the vegetable fat could behave more like lard in the body.

Men who ate a series of three diets, substituting a portion of their fats with olive oil, palm olein and lard, had lower levels of LDL ("bad") cholesterol and total cholesterol after the olive oil diet than after the other two.


Researchers did not show that the increased cholesterol levels had an effect on the men`s health, but high cholesterol is thought to lead to an increased risk of having a heart attack.

The rise in cholesterol seen in this study "would increase the risk of heart disease by at least five percent," said Dr. Peter Clifton at the University of Adelaide in Australia, who was not involved in the work.

The research team, led by Tine Tholstrup at Copenhagen University, asked 32 normal-weight young men to replace a portion of the fats in their usual diets with palm olein, olive oil or lard during each of three weeks.

The order of the diets was randomly assigned and the study fats were contained in buns and cakes.

At the start and end of each week, the researchers collected blood samples and measured the men`s weights.

After their week eating olive oil, the men had 4.5 percent lower total cholesterol levels, on average, than after the other two diets. The difference was largely due to lower LDL levels.

Lard, made from pig fat, had similar effects on blood cholesterol levels as palm olein.

Though previous studies have not always agreed on whether palm oil is bad for cholesterol levels, Clifton told Reuters Health in an email that he was not surprised by the results and that they provide a "very clear" answer.

"The majority of studies support the concept that palmitic acid in palm oil raises LDL cholesterol," Clifton wrote in an editorial that accompanied Tholstrup`s study in the American Journal of Clinical Nutrition.

Palmitic acid is a saturated fatty acid found in a variety of oils, and is the primary fatty acid in palm oil.

High levels of LDL cholesterol, as opposed to high-density lipoprotein, or HDL, cholesterol, are considered bad for people`s cardiovascular health.

But the authors write in their report that the increase in cholesterol after the palm olein diet was small, "and may not be of any clinical significance."

Tholstrup`s team also tested the men for levels of C-reactive protein -- used to predict cardiovascular disease risk -- and did not find any differences among the three diets.

Tholstrup recently published a study that found cheese and butter, despite both being made from milk fat, produced differing effects on cholesterol levels (see Reuters Health story of November 14, 2011).

"The role of saturated fat is controversial, as newer studies have not been able to find an association between intake of saturated fat and coronary heart disease," Tholstrup told Reuters Health in an email.

Still, Tholstrup said she recommends people choose cooking oils with unsaturated fat such as olive, rape seed, sunflower, soy bean and grape seed oils.

The current study was funded by the Malaysian Palm Oil Board, a government trade agency.

Start-up fund for biodiesel programme

Posted by Flora Sawita Labels: ,

Tan Sri Bernard Dompok (right) and Datuk Lee Yeow Chor at the briefing.

By HANIM ADNAN
nem@thestar.com.my 

Petronas, Shell, BHP, ExxonMobil and Chevron gets RM1mil each

KUALA LUMPUR: Petroliam Nasional Bhd (Petronas), Shell, BHP, ExxonMobil and Chevron have been allocated with a start-up fund worth RM1mil each by the Malaysian Palm Oil Board (MPOB) to set up infrastructure for B5 biodiesel blending facilities.

Plantation Industries and Commodities Minister Tan Sri Bernard Dompok said the initial incentive given to the five petroleum companies reflected the Government’s intention to fully implement the mandatory B5 biodiesel programme by the middle of next year.

B5 is the blending of 5% biodiesel with 95% fossil fuel diesel. The much delayed B5 programme was initially slotted for launch in January this year.

“We are on target for the B5 biodiesel implementation by June 2011,” Dompok told a briefing after opening the 3rd International Palm Oil Trade and Seminar (POTS) organised by MPOB yesterday.

He said the five petroleum companies would need to install pipes, tanks and automation system to blend B5 biodiesel at the designated depots, starting with central region – Port Klang and Putrajaya (Selangor) – as well as Dengkil (Negri Sembilan) and Tangga Batu (Malacca).

On the B5 pricing, Dompok said: “Between now till the implementation (mid-2011), we will have a lot of time to figure out the various solutions to issues that will distort the B5 programme in the local market.”

Given the high raw material (palm methyl ester) cost, the B5 biodiesel is said to be more pricey than the currently heavily subsidised diesel fuel.

The B5 biodiesel programme will see some 500,000 tonnes of local palm oil stock being taken up. The current palm oil stock was about 1.7 million tonnes, said Dompok.

Earlier, when asked whether Malaysia’s crude palm oil (CPO) production would be able to meet its target of 17.8 million tonnes this year, Dompok said: “Right now, we are not far off from this target.

“Despite talk of an El Nino early this year, it didn’t really came. I think the next three months will be crucial as all our harvests will start to come in.”

On whether CPO price will likely hit RM3,000 per tonne this year, Malaysian Palm Oil Council chairman Datuk Lee Yeow Chor said the council’s focus was more on global market expansion and no so much price-centric.

“We are more concern with the healthy growth in the global consumption for palm oil and want to diversify our export markets,” he added.

Lee said there should not be any misinformation on the sustainability of palm oil that could distort its market expansion efforts.

Dompok, meanwhile, said the Government was aware of the pressures of diminishing suitable land for oil palm cultivation in Malaysia.

“We are actively looking at ways to improve productivity,” he said, adding that between 2009 and 2010, some RM100mil was allocated to assist smallholders in replanting activities.

Replanting is widely seen as a way to enhance productivity and also to achieve Malaysia’s long-term target to achieve national average of 35 tonnes of fresh fruit bunches and oil extraction rate of 25% by 2020.

 

CPO: Where To ?

Posted by Flora Sawita Labels: , , , , ,


The CPO ( Crude Palm Oil ) futures for August contract open at 2407 and closed at 2386 last Friday. The highest was at 2419 and the lowest was 2379. The market ended lower with a black bar and was sellers' market.

After opening at 2407,the market moved up to 2414 at 10.40a.m. and between 10.40a.m. to 11.00a.m.,the market moved between 2412 to 2418 points. The market achieved the highest of the day at 2419 before closing at 2416 to end the morning session.In the afternoon, the market open at 2413 , moved up to 2415 and then started to retrace to the lowest of the day at 2379 before finally closed at 2386.

If you refer to my forecast on last Friday, see #2, and had placed a sell position between 2411 to 2417 ( see the enclosed graph), you would have been able to make profits of between 10 to 35 points provided if you decided to close the position in the evening. If you had decided to close the position before the lunch break, you would have had your finger burnt ( anyway, you had no choice here but to wait to after lunch).

Ok, guys, that's about it.


Have a nice trading day.



P/s. Refer to a comment made on last Friday's posting, I think I would like to take a rest from making any forecast for a while ( in fact I have been considering to do so for quite sometimes )

10.59am

Reversal ?

Posted by Flora Sawita Labels: , , , , , ,

Last Friday, based on my forecast, the market open within one of my forecasts but it did not move accordingly. For the last few days, the market has been moving southwards and will this movement be continued or will it reverse ? Hard to say, right?

Today

The forecast for today;

1) If the market opens between 2412 to 2419. Buy after the market has moved up passing the levels between 2424 to 2429..
2) If the market opens between 2404 to 2411. Sell after the market has moved up 4 to 10 points above the opening level.
3) If the market opens between 2396 to 2403. Sell after the market has retraced passing down the levels between 2386 to 2391.
4) If the market opens between 2424 to 2435. Buy after the market has dropped a bit and then moves up passing 5 points above the opening level.
5) Also refer to my posting dated 11th January, see # 6

That's about it guys, if you are not sure... well,I don't know...


Have a nice trading day, guys.

P/s Have you seen the movie, " Pirates of The Mediterranean?" - The pirates use commandos to attack civilian ships. Commandos?

8.55am

CPO Ends Low

Posted by Flora Sawita Labels: , , , , , ,


The CPO ( Crude Palm Oil) futures for August contract open at 2473 and closed at 2456 yesterday. The highest was at 2482 and lowest was at 2453. The market ended lower with a black bar, increased open interest and was sellers' market. Theoretically, the market is said to be on the southwards movement.

Today

In long run, the market is still bearish and so is the very very short term. The forecast for today;


1)If the market opens between 2471 to 2480. Buy after the market has moved up passing the levels between 2475 to 2480.
2) If the market opens between 2462 to 2470. Sell after the market has moved up 5 to 10 points above the opening level.
3) If the market opens between 2453 to 2461. Sell after the market has fallen passing down the levels between 2443 to 2448.
4) If the market opens between 2435 to 2448. Sell after the market has moved a bit and then falls 5 points below the opening level.
5) If the market opens between 2493 and above, I would say that the market may move further up and may end a white bar today, that is it.
6) If the market opens besides the above,I do not know, up to you.
7) Also refer to my posting dated 11th January, see #6.

Anyway, if you are not sure, do not contact your dealer, just contact Netanyahu but not Obama.

That is about all.

Have a nice trading day, guys.

P/S The sinking of South Korean warship at Yellow Sea bordering North Korea last month could be the work of the Mossad or CID. The intention is to destabilise the region especially China because China is set to be the next economic and military giant of the world. What say you?

8.58am

On The Way Up?

Posted by Flora Sawita Labels: , , , , ,


For the past 2 days, the market has shown an upwards movement. Will this show that the market is to continue to further going up again?

Today

In brief, the forecast for today are as follows;

In long run, the market is still bearish but the very very short term, the market is bullish now.

1) If the market opens between 2458 to 2465. Sell after the market has retraced and passed down the levels between 2448 to 2453.
2) If the market opens between 2440 to 2453. Sell after the market has gone up a bit and then falls 5 points below the opening level.
3) If the market opens other than the above, it is your call.
4) Also refer to my posting dated 11th January, see #6.

That's about it.

Have a nice trading day, guys.....

P/S: The Israelis attacked the civilian Turkish Mavi Marmara which killed more than 16 people on board using the commandos and 26 war ships? What US has to say to this? What happened if there were to be Americans on board. Well, Obama cannot do anything, the president of US is Netanyahu.

9.20am

CPO: August Contract

Posted by Flora Sawita Labels: , , , , ,


The CPO ( Crude Palm Oil) futures for August contract open at 2485 and closed at 2436 yesterday. The highest was at 2491 and the lowest was at 2436. The market ended lower with a black bar and it was sellers' market.

The market open at 2485, moved up to 2490 and then fell to 2479( see enlosed graph ). At about 10.48a.m., the market moved up again to 2491, the highest of the day, and then closed at 2490 before lunch. In the afternoon, the market open at 2475, shot up to 2488 and then started to retrace slowly to finally closed at 2436, the lowest of the day.

If you look at my forecast yesterday, see #1, you have 2 choices here;
1) If you were to decide to put a sell position between 2474 to 2478, there was nothing happen, you did not lose any money.
2) If you were to decide to put a sell position at 2479 ( you have to que first, off course) and manage to get it, you would have been able to make profits up to more than 40 points provided if you were to wait to after lunch break ( you have no choice because if you decided to close your position just before lunch, you would have ended up losing your money).

That's about it , guys......


Have a nice trading day.

8.15am

Next

Posted by Flora Sawita Labels: , , , , , ,


The Cpo ( Crude palm oil) for August contract open at 2489 and closed at 2490 yesterday. The highest was at 2498 and the lowest was at 2481. The market ended lower with a black bar and was sellers' market. The market open within one of the suggested forecasts but did not move as expected.

Today

In long run, the market is still bearish but the short term, the market is bullish. My forecast for the day;
.
.
1) If the market opens between 2483 to 2487. Sell after the market has retraced and passed down the levels between 2474 to 2479.
2) If the market opens between 2465 to 2478. Sell after the market has moved up a bit and then falls 4 points below the opening level.
3) If the market opens between 2488 to 2492. Buy after the market has dropped 3 points below the opening level.
4) If the market opens between 2511 to 2518. Buy after the market has dropped a bit and then moves up 4 points above the opening level.
5) Other than the above, it is your move.
6) Also refer to my posting dated 11th January, see #6


That's about it.

Have a nice trading day, guys.....

9.05am

Sign of going up?

Posted by Flora Sawita Labels: , , , , ,


Lately, probably about a few weeks back, my forecasts have not been giving positive results and at the same time my forecasts also have not been giving negetive outcomes.What I lose was my time! I have no idea what have gone wrong or may be my methodology/strategy is becoming absolete!

So, my forecast on last 13th of May - the market did not open within any of the forecasted points.

Today

Should I try to forecast again this time? Well,I don't know or may be just do it!

The forecast for today;
In long run, the market is bearish but in short run the market is still bullish.

1) If the market opens between 2483 to 2489. Sell after the market has retraced and passed down the levels between 2473 to 2478.
2) If the market opens between 2490 to 2495. Buy after the market has retraced 4 points below the opening.
3) If the market opens between 2465 to 2478. Buy after the market has moved up a bit and then falls 4 points below the opening level.

That's about it.

Have a nice trading day guys....

9.13am

Palm Oil As A Cheaper Source for Biodiesel Feedstock

Posted by Flora Sawita Labels:

Refined palm oil or crude palm oil are the right solutions in today market to stay competitive as the cost of rapeseed oil, soyabean oil or palm oil feedstock accounts for around 80–95% of the operating cost of the biodiesel process and in the same rank for co-firing unit. A substantial increase in the production capacity and number of biodiesel manufacturers would create greater competition for the supply of vegetable oil feedstock, leading to upward pressure on prices.

In terms of production volume, palm oil is the world's second most produced vegetable oil after soybean oil. Palm oil exports come predominantly from Malaysia and Indonesia and these two countries can be expected to maintain their dominant position in exports of oils and fats, accounting for 45% of total trade.
Even without biodiesel, demand for palm oil would still be driven by the food segment. In Europe , there is less rapeseed for food purposes as more rapeseed are being used as feedstock for biofuel. Palm oil can come in to fill in the gap left by rapeseed in the food segment.


Crude and refined palm oil have not only economics advantage for fuel for CHP / co-firing industry but also have the better power properties than rapeseed and soya 



Palm oil itself can be used in plants as an ignition fuel, replacing fossil-derived heavy fuel oil. In this way, the CO2 emissions that would have been created by the fuel oil (approximately 3 tonnes of CO2 per tonne of heavy fuel oil) are avoided.

Still bearish?

Posted by Flora Sawita Labels: , , , , , , ,


The CPO market dated 11th of May open not within one of the suggested forecasts so nothing happened!

Today

The forecast for today;

1) If the market opens between 2505 to 2510. Sell after the market has fallen the levels between 2495 to 2500.
2) If the market opens between 2511 to 2516. Buy after the market has moved up passing the levels between 2520 to 2524.
3) If the market opens between 2521 to 2526. Buy after the market has dropped a bit and then moves up 4 points above the opening level.
4) If the market opens between 2500 to 2506. Sell after the market has fallen passing the levels between 2490 to 2495.
5) If the market opens other than the above, it is simply your call.
6) Also refer to my psoting dated 11th January, see #6.

The best thing is to refer to your dealer if you are uncertain.

That's about it, just cross your finger.


Have a nice trading day, guys.

9.05am

CPO : May Contract

Posted by Flora Sawita Labels: , , , , ,


Recently, it seemed that my forecasts have not been giving postive results, even though no money were lost. It was just like my forecast on last 28th of April,the market open but not within the forecasted suggestions. It could be, probably, the market's volatily has not been like before especially in the morning session. May be I should be looking for a new strategy.

Today

Well, I still have no new strategy especially the strategy to forecast the market's movement before the market opens. In fact, it is much easier to forecast the market's movemet after the market has already open.

Anyway, my forecast;

1) If the market opens between 2520 to 2530. Buy after the market has moved up passing the levels between 2535 to 2540. More significant if the market opens more towards the upper level of the 2520-to-2530.
2) If the market opens between 2517 to 2527. Sell after the market has retraced passing down the levels between 2504 to 2509. More significant if the market opens more towards the lower part of the 2517-to-2527 levels.
3) Also refer to my posting dated 11th January, see #6

That's about it.

Have a nice trading day, guys

8.25am

Bullish Trend?

Posted by Flora Sawita Labels: , , , , ,


I refer to my forecast dated last 15th April. It seems that on that particular day, the market open within one of my forecasted points but it did not move according to what had been forecasted. So no gain, no loss!

Today

The trend now is bullish, so the market is expected to move further up. Anyway, it still very much depends on the opening of the market. The forecast for today;

1) If the market opens between 2551 to 2559. Buy after the market has moved up passing the levels between 2561 to 2566.
2) If the market opens between 2520 to 2530. Sell after the market has moved up a bit and then falls 5 points below the opening level.

That's about it for today.

Also refer to my posting dated 11th January, see #6.



Have a nice trading day, guys

9.19am

Label

2011 News AGRIBISNIS APINDO Africa Agriculture Business Agriculture Land Argentina Australia Bangladesh Berita Berita Detikcom Berita Info Jambi Berita Kompas Berita Padang Ekspres Berita Riau Pos Berita Riau Today Berita Tempo Berita riau terkini Biodiesel Bursa Malaysia CPO Tender Summary Cattle and Livestock China Cocoa Company Profile Corn Cotton Crude Palm Oil (CPO) and Palm Kernel Oil (PKO) Dairy Dairy Products Edible Oil Euorope European Union (EU) FDA and USDA Fertilizer Flood Food Inflation Food Security Fruit Futures Futures Cocoa and Coffee Futures Edible Oil Futures Soybeans Futures Wheat Grain HUKUM India Indonesia Info Sawit Investasi Invitation Jarak pagar Kakao Kapas Karet Kebun Sawit BUMN Kebun Sawit Swasta Kelapa sawit Kopi Law Lowongan Kerja MPOB Malaysia Meat News Nilam Oil Palm Oil Palm - Elaeis guineensis PENGUPAHAN PERDA Pakistan Palm Oil News Panduan Pabrik Kelapa Sawit Penawaran menarik Pesticide and Herbicide Poultry REGULASI RSPO Rice SAWIT Serba-serbi South America Tebu Technical Comment (CBOT Soyoil) Technical Comment (DJI) Technical Comment (FCPO) Technical Comment (FKLI) Technical Comment (KLSE) Technical Comment (NYMEX Crude) Technical Comment (SSE) Technical Comment (USD/MYR) Teknik Kimia Thailand Trader's Event Trader's highlight USA Ukraine Usaha benih Vietnam Wheat benih bermutu benih kakao benih kelapa benih palsu benih sawit benih sawit unggul bibit sawit unggul biofuel biogas budidaya sawit corporation palm oil pembelian benih sawit perburuhan pertanian soybean umum varietas unggul